Stulz-Sickles Manganal Steel Bars & Plates
Wear Resistant High Manganese High Carbon Steel
variable sizes and lenghts or custom dimentions.
Pins & Bushings
Wire Screen - various wire diameters, standard square or weave openings, custom produced.
Wear Bars (example: wear bars on bottom of excavator bucket).
Grizzly Bars (can be flame cut/plasma cut).
Fabricated Parts to Specification Welded, Punched, Drilled and Formed Fabrications will be Quoted on Submission of Sketch or Blueprint Specifications.
Resists all impact and abrasion.
Work Hardens rapidly up to 550 Brinell due to high carbon content.
Remains ductile throughout, never brittle.
Work Hardened surface becomes almost frictionless, which allows the materials to slide easily.
Has Non-Magnetic property.
Can be cut by Oxy-Acetylen E Torch, Plasma, Water Jet or Laser.
Fully heat treated.
Manganal is used maintenance and repair within the Foundry and Shot Blast Industries, Barrel Head Liners, Floor Liners, Wheel Housings, Chains, Cab Wall Liners, Table Liners, Flights, Hooks, Hanging Liners, Table Rings, Blasting Trees, Shafts, Rotary Screen Separators, Floor Gratings and any other places where heavy impact, abrasion or metal-to-metal wear is a problem.
Real World Applications:
Grizzly Bars after two years of service. Prior to switching to manganal, the customer was building up bars yearly. Manganal side plates show little wear after two years.